Material family
Acrylic dispersions
Waterborne binders for balancing film hardness and flexibility.
Selection on request
RAW MATERIALS FOR INDUSTRY
Raw materials
Five sectors. A clear route to the materials you need.
Material family
Styrene-acrylic dispersions
Binders for waterborne formulations; resistance and service conditions depend on grade.
Selection on request
Material family
Polyurethane dispersions
Waterborne polyurethane binders for evaluating adhesion, flexibility and film resistance.
Selection on request
Material family
Epoxy resins
Reactive bases for coatings and floors, paired with a separately selected hardener.
Selection on request
Material family
Epoxy hardeners
Hardeners matched to the resin, application conditions and required resistance.
Selection on request
Material family
Dispersing additives
Additives for pigment wetting and stabilization in the selected binder.
Selection on request
Material family
Defoamers
Additives for foam control during manufacture and application, with film-defect testing.
Selection on request
Material family
Rheology modifiers
Additives for adjusting flow, sag control and formulation stability.
Selection on request
Material family
Wetting additives
Additives for substrate wetting and coating surface quality.
Selection on request
Material family
Matting agents
Additive family for adjusting gloss and appearance in a specific coating.
Selection on request
Grade
ACEMATT® TS 100
Evonik matting additive based on untreated thermal silica. Himtrade's owner confirms it as a supply line; availability, terms and documents require an enquiry.
Selection on request
Material family
Vinyl acetate-ethylene dispersions
Waterborne polymer bases for adhesives; substrates and resistance require grade validation.
Selection on request
Material family
Polyvinyl acetate dispersions
Waterborne adhesive binders for evaluating joints between porous substrates.
Selection on request
Material family
Tackifier resins
Resins for adjusting initial tack and adhesive viscoelastic behavior.
Selection on request
Material family
Silane-modified polymers
Bases for moisture-curing sealants, using a distinct technology and component selection.
Selection on request
Material family
Polyether polyols
Polyol components for adjusting flexibility and reaction behavior of PU systems.
Selection on request
Material family
Polyester polyols
Polyols with backbone selection based on mechanical properties and service environment.
Selection on request
Material family
Polyisocyanates
Reactive PU components. The exact grade and handling conditions must be checked before an offer.
Selection on request
Material family
PU catalysts
Components for adjusting reaction rates, without a universal addition recommendation.
Selection on request
Material family
PU chain extenders
Reactive components for adjusting polyurethane structure and mechanical behavior.
Selection on request
Material family
PU foam surfactants
Additives for evaluating cell structure in a specific foam system.
Selection on request
Material family
Chloroprene rubber
A Himtrade rubber line. This is a polymer material; grade selection depends on processing and finished-part testing.
Selection on request
Material family
Nitrile rubber
NBR family for evaluating the balance of oil resistance, flexibility and processing.
Selection on request
Material family
EPDM rubber
Elastomer for evaluating weather-resistant parts; media compatibility needs separate testing.
Selection on request
Material family
SBS and SIS block copolymers
Thermoplastic elastomers for compound selection; SBS and SIS are not assumed interchangeable.
Selection on request
Material family
Rubber curing ingredients
Cure-system ingredients for a specific rubber and processing cycle.
Selection on request
Material family
EVA copolymers
An owner-confirmed plastics line. Suitability for a specific part must be established for the exact grade.
Selection on request
Material family
Polypropylene
Homopolymer and copolymer families for process-specific grade selection.
Selection on request
Material family
Polyethylene
PE families for extrusion or molding selection after the technical brief is defined.
Selection on request
Material family
Plastic antioxidants
Additives for evaluating polymer resistance to thermo-oxidative processes.
Selection on request
Material family
UV stabilizers
Additives for evaluating plastic resistance to light aging under specified conditions.
Selection on request
Material family
Processing aids
Functional ingredients for evaluating melt flow and surface quality.
Selection on request
Material family
Flame-retardant additives
Ingredients for developing and testing flame-retardant compounds; a classification is confirmed only by testing the finished article.
Selection on request
No materials found. Try a different term or send your selection brief.
Family information helps prepare a technical brief. Grade, supply availability, lead time and documentation are agreed separately. No stock availability is claimed.